NEWS

Industry trends

Media Coverage

Application range of aluminum sheet

Application range of aluminum sheet

Aluminum veneer curtain wall is applicable to the decoration of various building internal and external walls, lobby facade, column decoration, elevated corridor, pedestrian bridge, elevator wrapping, balcony packaging, advertising signs, indoor shaped ceiling, etc. Building facades, beams and columns, balconies, canopies airports, stations, hospitals, conference halls, opera houses, stadiums, reception halls and other high-rise buildings.

28

2022

/

10

Material and structure of aluminum plate

Material and structure of aluminum plate

Aluminum veneer curtain wall adopts high quality and high strength aluminum alloy plate, the common thickness is 1.5, 2.0, 2.5, 3.0MM, the model is 3003, the state is H24. the large size of the conventional material is 1220MM×2440MM. its structure is mainly composed of panel, reinforcement and corner code. Corner code can be directly bent and stamped by the panel, or riveted on the small side of the panel to form the corner code. The reinforcement bars are connected with the welding screws after the panel surface to make it a solid whole, which greatly enhances the strength and rigidity of the aluminum veneer curtain wall and ensures the flatness and wind and earthquake resistance in long-term use. If you need sound insulation and heat preservation, sound insulation and heat preservation materials can be installed on the inside of the aluminum plate.

28

2022

/

10

Characteristics of aluminum plate

Characteristics of aluminum plate

Light weight, good steel, high strength 3.0mm thick aluminum plate weighs 8kg per square plate, tensile strength 100-280n/m㎡

28

2022

/

10

Basic introduction of aluminum plate

Basic introduction of aluminum plate

The structure of aluminum veneer is mainly composed of panels, reinforcement bars and corner codes. Formed large workpiece size can reach 8000mm×1800mm (L×W)

28

2022

/

10

What is aluminum veneer

What is aluminum veneer

Aluminum veneer is a building decoration material formed by processing after chroming and other treatments, and then using fluorocarbon coating technology. Fluorocarbon coating mainly refers to polyvinylidene fluoride resin (KANAR500), which is divided into three kinds of primer, topcoat and varnish.

28

2022

/

10

< 12345 >